Our Pressure Washing & Sealing Process

FREE ESTIMATE
FREE ESTIMATE

  • 1. Surface Inspection

    Before cleaning begins, we inspect the area to identify the surface type, stains, algae, mildew, buildup, damaged areas, existing coatings, and anything that may require extra care.

    2. Area Preparation

    We clear loose debris and prepare the surrounding area before washing. Nearby landscaping, walls, doors, fixtures, and other sensitive surfaces are protected as needed.

    3. Pre-Treatment

    Depending on the condition of the surface, we apply a professional cleaning treatment to help break down dirt, organic growth, grime, and stubborn buildup before pressure washing.

    4. Stain Treatment

    Oil spots, rust, organic staining, and other problem areas may receive additional treatment when appropriate. Some stains can penetrate deep into concrete or stone, so results can vary depending on the age and severity of the stain.

    5. Professional Surface Cleaning

    Large flat surfaces such as driveways, patios, pool decks, sidewalks, and walkways are cleaned using professional-grade equipment designed to provide an even and consistent finish.

    Pressure and cleaning techniques are adjusted depending on whether we are working with concrete, natural stone, pavers, or another surface.

    6. Detail & Edge Cleaning

    Corners, edges, steps, joints, walls, and areas that cannot be fully reached with the surface cleaner are detailed separately to make sure the entire area receives a thorough cleaning.

    7. Final Rinse

    The surface and surrounding work area are thoroughly rinsed to remove loosened dirt, cleaning solutions, and remaining debris.

    8. Final Inspection

    Once the cleaning is complete, we inspect the surface again and address any areas that may need additional attention.

    Additional Restoration Options

    For surfaces that need more than a basic cleaning, we can also provide services such as polymeric sand replacement, deeper stain treatment, sealing, natural-look finishes, gloss or semi-gloss finishes, and grip additives for pool decks and wet areas.

  • 1. Surface Inspection

    We begin by inspecting the concrete, pavers, or natural stone to check for stains, existing sealer, joint condition, damage, algae, buildup, and any areas that may require additional preparation.

    2. Deep Cleaning

    The surface is thoroughly pressure washed and cleaned to remove dirt, grime, algae, mildew, and surface buildup. Stain treatments may also be used on oil, rust, organic staining, and other problem areas when appropriate.

    3. Old Sealer Removal When Needed

    If the surface has failing, cloudy, peeling, or improperly applied sealer, additional stripping or restoration may be required before a new sealer can be applied.

    4. Joint Cleaning & Polymeric Sand

    For paver surfaces, joints are cleaned out as needed and fresh polymeric sand can be installed to help stabilize the pavers, reduce joint washout, and create a cleaner finished appearance.

    5. Drying & Surface Preparation

    The surface is allowed to properly dry before sealing. We check moisture levels and overall surface condition to help ensure the sealer bonds and cures correctly.

    6. Sealer Application

    The appropriate professional-grade sealer is applied based on the surface and the desired finish.

    Options can include:

    • Natural Look – protects the surface while maintaining a more natural appearance

    • Semi-Gloss – provides moderate color enhancement and sheen

    • Gloss Finish – creates a richer, enhanced appearance with a more noticeable shine

    • Grip Additive – available for pool decks, patios, walkways, and other areas where additional traction may be desired

    7. Detailed Application

    Edges, joints, borders, steps, and surrounding areas are carefully addressed to provide an even and consistent finish throughout the project.

    8. Curing & Final Inspection

    After sealing, the surface is allowed to properly cure before normal foot or vehicle traffic resumes. We complete a final inspection to make sure the finish is consistent and the surface is properly protected.

    Built for Long-Term Protection

    Professional sealing can help protect driveways, pool decks, patios, walkways, pavers, concrete, and natural stone from staining, moisture, weather exposure, fading, and everyday wear while making the surface easier to maintain.

  • Surface-Specific Experience

    Concrete, pavers, and natural stone all require different cleaning and sealing methods. We adjust our process, pressure, products, and application based on the surface we’re working with.

    Detailed Preparation

    A quality finish starts with proper preparation. We focus on thorough cleaning, stain treatment, joint preparation, and drying before sealing begins.

    Professional-Grade Products

    We use professional cleaning treatments, polymeric sand, sealers, and grip additives selected for durability, appearance, and the needs of each project.

    Multiple Finish Options

    Choose the look that fits your property, including natural-look, semi-gloss, and gloss finishes, with optional grip additives for pool decks and other wet areas.

    Clean, Consistent Results

    From driveways and walkways to patios and pool decks, we focus on even cleaning, careful application, clean edges, and a finished result that improves the overall appearance of your property.

    Straightforward Service

    We provide clear recommendations based on the condition of your surface and what it actually needs—whether that's cleaning, sealing, restoration, or a combination of services.

  • A modern white house with multiple levels, balconies, and large windows, featuring a backyard with a swimming pool, lounge chairs, and outdoor dining area, under a clear blue sky.

    Natural Look Sealer

  • Backyard with a swimming pool, hot tub, and a decorative swan fountain, surrounded by a stone patio and trees.

    Semi Gloss enhancer Sealer With grip

  • Back patio with beige paver flooring, a wooden fence, and the side of a house with brick and white siding. There is a small black table with gardening tools and items, and some garden pots and plants in the foreground.

    Glossy finish Sealer

  • Back porch area with dark gray brick pavers, white exterior wall, glass door with wreath, two outdoor lanterns, garden tools, plants, and neighboring houses in the background.

    Glossy Finish Sealer